Metale

În această categorie puteți vedea acele mostre în care materialul de bază este în principal din metal.

• 
  Plinta din aluminiu inainte de perlare…
• 
  Plinta din aluminiu dupa perlare.
• 
  Piesa Art Nouveau inainte de sablare…
• 
  Piesa Art Nouveau dupa sablare fina.
• 
  Mostra pentru sabblarea unei piese antice. (poza 1.)…
• 
  Dezansamblarea si sablarea profesionala a piesei antice (poza 2.)
• 
  Piesa folosita la fabricare becuri auto. Inainte si dupa sablare. Indepartarea oxizilor.(1)
• 
  Piesa folosita la fabricare becuri auto. Inainte si dupa sablare. Indepartarea oxizilor. (2)
• 
  Piesa ax masina curse dupa calire si dupa sablare prelucrat pentru polizare.
• 
  Piese de debitare si injectie.Curatarea acestora menajind taisurile.
• 
  Captuseala cuptor din inox infectata cu nitrat de titan si nitrati de aluminiu (1)
• 
  Captuseala cuptor din inox dupa sablare. (2)
• 
  Piese turnate din aluminiu inainte de omogenizare.Indepartarea urmelor de polizare. (1)
• 
  Piese turnate din aluminiu dupa sablare,. Se pot vedea zonele sensibile intacte. (2)
• 
  Piese de aluminiu omogenizata dupa eloxare neagra.( Piesa a unui aparat RTG: Philips). (3)
• 
  Casa de registrare de moda veche dupa reinoire. Restauraea kompleta a fost facuta de noi .(1)
• 
  Casa de registrare de moda veche dupa reinoire. Restauraea kompleta a fost facuta de noi. (2)
• 
  Casa de registrare de moda veche dupa reinoire. Restauraea kompleta a fost facuta de noi. (3)
• 
  Piesa injectie Pet plastice.In procesul de reparatie suprafata se lezeaza. Si aceasta se poate omogeniza.
• 
  Piese de bicicleta dupa sablare.
• 
  Piesa auto inainte de curatare…
• 
  Piesa auto dupa curatare, sablare…
• 
  Piesa auto dupa perlare.
• 
  Piesa auto in cele trei faze.
• 
  Motor barca inainte de reinoire. Vopsea neagra, decoratii si alte contaminari.(1)
• 
  Motor barca dupa curatare. Camerele rulmentilor au fost corespunzator protejate. (2)
• 
  Piese barca cu motor inainte de reinoire. Vopsea neagra, decoratii si alte contaminari. (3)
• 
  Piese barca cu motor dupa curatare. (4)
• 
  Motor barca inainte de reinoire. Vopsea neagra, decoratii si alte contaminar. (5)
• 
  Motor barca dupa curatare. Camerele rulmentilor au fost corespunzator protejate. (6)
• 
  Roata dintata inainte de reparatie. (1)
• 
  Roti dintate inainte de prelucrare. Piesa calibru nu intra la loc. (2)
• 
  Roti dintate inainte de prelucrare. Piesa calibru nu intra la loc. (3)
• 
  Roti dintate dupa prelucrare. Piesa calibru intra la loc corespunzator. (4)
• 
  Roti dintate dupa prelucrare. Piesa calibru intra la loc corespunzator.(5)
• 
  Verificarea roatii dintate cu calibru lateral static. Rezultat:bun. (6)
• 
  Verificarea roatii dintate cu calibru lateral static. Rezultat:bun. (7)
• 
  Piesa INOX inainte de prelucrare.… (poza 1.)
• 
  Piesa INOX dupa perlare… (poza.2.)
• 
  Piesa INOX dupa perlare. Cealalta parte… (poza.3.)
• 
  Piesa INOX ambalata, protejata pe timpul transportului.(poza.4.)
• 
  Piese Trabant inainte de sablare.
• 
  Piese Trabant dupa sablare.
• 
  Roata dintata inainte de curatare.
• 
  Roata dintata dupa curatare si indepartarea uzurilor.
• 
  Geanta arsa inainte de prelucrare…
• 
  Geanta arsa dupa prelucrare curatata pregatita pentru vopsire.
• 
  Geanta aliaj- aluminiu uzata.
• 
  Geanta aliaj-aluminiu dupa curatare pregatita pt. urmatorele operatiuni.
• 
  Piesele Shot- sablate nu numai ca au o viabilitate mai mare dar sunt si mai frumoase.
• 
  Echipamente din plastic înainte de prelucrare.
• 
  Echipamente de plastic după ce au fost lucrate pentru VDI 27.
• 
  Echipamente din plastic înainte de prelucrare.
• 
  Echipamente de plastic după ce au fost lucrate pentru VDI 27.
• 
  Instrumentul de aluminiu înainte de prelucrare.
• 
  Instrument de aluminiu după prelucrare, pregătit pentru VDI 30.
• 
  Foi de fier forjat într-un conac provincial ...
• 
  Reteaua din fier forjat intr-un conac provincial dupa curatare, pregatita pentru galvanizare.
• 
  Articole de cupru vechi înainte de renovare.
• 
  Articole de cupru vechi după renovare.
• 
  BMW motorcycle before beading its aluminum parts…
• 
  BMW motorcycle aluminum parts after beading.
• 
  Beaded BMW motorcycle component (1)
• 
  Beaded BMW motorcycle component (2)
• 
  BMW motorcycle: piston housing after bead blasting.
• 
  Rally car before cleaning. (1)
• 
  Rally car before cleaning. (2)
• 
  Rally car after cleaning. (1)
• 
  Rally car after cleaning. (2)
• 
  Cast-iron stove before renovation.
• 
  Components before nickelization.
• 
  Cast-iron stove component prepared for welding.
• 
  Cast-iron stove component after welding.
• 
  The stove after bead blasting.
• 
  The stove after full renovation.
• 
  The DKW motorcycle used to look like this.
• 
  The motorcycle disassembled.
• 
  The gears are disassembled.
• 
  You can observe that it was painted without a suitable surface treatment.
• 
  DKW cylinder head and gear housing after beading.
• 
  DKW cylinder head and gear housing after beading. The crossbar needs blasting.
• 
  DKW motorcycle is blasted.
• 
  Components with ground coat. (Done by the owner himself).
• 
  Motor rim prepared for blasting.
• 
  The rim is disassembled before blasting.
• 
  The rim after blasting. (1)
• 
  The rim after blasting. (2)
• 
  DKW components after blasting. (The engraved data which can be found on these components are carefully protected.)
• 
  The engraved data on the surface becomes cleaner and easily readable. It is possible to perform such fine blasting. (1)
• 
  The engraved data on the surface becomes cleaner and easily readable. It is possible to perform such fine blasting. (2)
• 
  DKW motor component after cleaning.
• 
  Motor hub after beading. (Protection by the owner himself)
• 
  Mercedes cooling fan blade before renovation...
• 
  Mercedes cooling fan blade after renovation.
• 
  Diving tanks.
• 
  We pay scrupulous attention to our customers’ requests so that the engraved data on the surface remain intact.
• 
  Diving tanks after blasting.
• 
  Diving tanks after blasting. The signs on the surface remained intact.
• 
  Fireplace accessory before blasting.
• 
  Fireplace accessory after blasting.
• 
  Rims. New race, new colour. Before cleaning. (1)
• 
  Rims. New race, new colour. Before cleaning. (2)
• 
  After cleaning. It is possible to blast objects in this quantity in 1 day.
• 
  Auto bus brake system before sandblasting.
• 
  Auto bus brake system after sandblasting.
• 
  Pasta machine before degreasing and beading. (1)
• 
  Pasta machine before degreasing and beading. (2)
• 
  Pasta machine before degreasing and beading. (3)
• 
  Pasta machine before degreasing and beading. (4)
• 
  After degreasing and soaking, the object can be blasted. (1)
• 
  After degreasing and soaking, the object can be blasted. (2)
• 
  After degreasing and soaking, the object can be blasted. (3)
• 
  After degreasing and soaking, the object can be blasted. (4)
• 
  Soaked and beaded. Now it can be installed. (1)
• 
  Soaked and beaded. Now it can be installed. (2)
• 
  Soaked and beaded. Now it can be installed. (3)
• 
  The mount of a banking entry system after welding. (1)
• 
  The mount of a banking entry system after welding. (2)
• 
  The mount of a banking entry system after beading. (1)
• 
  The mount of a banking entry system after beading. (2)
• 
  Red copper electrical component after being welded with silver.
• 
  Electrical component blasted with fine material ensuring perfect electrical contact…and it’s aesthetical.
• 
  Wrought-iron banister needs coating. (1)
• 
  Wrought-iron banister needs coating. (2)
• 
  Wrought-iron banister needs coating. (3)
• 
  Wrought-iron banister after bead blasting; now it can be painted with guarantee. (1)
• 
  Wrought-iron banister after bead blasting; now it can be painted with guarantee. (2)
• 
  Wrought-iron banister after bead blasting; now it can be painted with guarantee. (3)
• 
  Bead blasted and contaminated American motor boat blocs.
• 
  Both motor boat blocs are prepared for processing. They are easier to work on.
• 
  Old-timer car body parts need blasting. (1)
• 
  Old-timer car body parts need blasting. (2)
• 
  Old-timer car body parts after blasting. Now it is locked and polished.
• 
  Skoda Octavia crankcase and lid.
• 
  Skoda Octavia crankcase and lid, components beaded.
• 
  Auto bus turbo charger and piston – before renovation...
• 
  Auto bus turbo charger – the surface is renovated with beading.
• 
  Valve lid.
• 
  The valve lid prepared for electrostatic painting.
• 
  A part of cleaned wrought-iron.
• 
  Window bars after blasting. (The galvanized layer remained, only the painting was removed.)
• 
  Feeding hopper for a food machine. (1)
• 
  Feeding hopper for a food machine. (2)
• 
  Feeding hopper for a food machine. (3)
• 
  The feeding hopper preserved with beading and oiling.(1)
• 
  The feeding hopper preserved with beading and oiling.(2)
• 
  The feeding hopper preserved with beading and oiling.(3)
• 
  Spoilt polish. The object needs homogenizing.
• 
  The objects were bead blasted. It is cheaper, quicker, and of high quality.
• 
  Plastic equipment prepared for VDI 36.
• 
  An object without appropriate surface preparation. The fault is due to bad adherence. (The coating is about 3 weeks old.)
• 
  Spoilt electrostatic painting. The work piece needs to be cleaned.
• 
  Spoilt electrostatic painting after blasting.
• 
  Old-timer car rim.
• 
  Old-timer car rim after beading.
• 
  Old-timer motor component.
• 
  Old-timer motor component cleaned.
• 
  Old-timer motor component before beading.
• 
  Old-timer motor component after beading.
• 
  Small motor parts.
• 
  Small motor parts before galvanization.
• 
  Puch engine needs beading.
• 
  Puch engine after beading.
• 
  Old-timer motor housing after cleaning.
• 
  Old-timer motor after cleaning.
• 
  Old-timer motor components after cleaning.
• 
  Old-timer motor components after cleaning.
• 
  Motorcycle sidecar.
• 
  Motorcycle sidecar.
• 
  Ford Thunderbird needs bead blasting.
• 
  Ford Thunderbird bead blasted.
• 
  Ford Thunderbird bead blasted.
• 
  Ford Thunderbird bead blasted.
• 
  Paint tank (manufactured by our company)...
• 
  Paint tank sandblasted (manufactured by our company).
• 
  Cast-iron radiator before cleaning.
• 
  Cast-iron radiator after cleaning.
• 
  Drum brake before renovation...
• 
  Drum brake after bead blasting. (Observe the professional covering of the bearing houses.)
• 
  Drum brake system after electrostatic painting.
• 
  Wrought-iron door after blasting.
• 
  Wrought-iron wall ornament.
• 
  Wrought-iron wall ornament sandblasted.
• 
  Wrought-iron chandelier.
• 
  Wrought-iron chandelier sandblasted.
• 
  Old-timer motorcycle.
• 
  Old-timer motorcycle after cleaning.
• 
  A stove from the rubbish dump.
• 
  A stove from the rubbish dump after cleaning.
• 
  A stove from the rubbish dump after cleaning with a heat-resistant paint coat.
• 
  Old theatre accessory (washstand).
• 
  Old theatre accessory (washstand) after cleaning.
• 
  Car rim with and without blasting.
• 
  Wrought-iron bars.
• 
  Wrought-iron bars after cleaning.
• 
  Wrought-iron banister.
• 
  Wrought-iron banister bead blasted.
• 
  An old iron.
• 
  Old irons prepared for painting.
• 
  Old iron after painting.
• 
  The steel structure of a roof after cleaning.
• 
  An old child’s stove.
• 
  An old child’s stove bead blasted.
• 
  Old weapons…
• 
  Old weapons after cleaning.
• 
  Cog-wheels after tempering.
• 
  Cog-wheels shot-blasted.
• 
  Gas convector housing.
• 
  Gas convector housings after bead blasting.
• 
  Bank lamp after full renovation.
• 
  Enameled drinking fountain before cleaning.
• 
  Enameled drinking fountain after cleaning.
• 
  Tile stove component before blasting.
• 
  Tile stove component after blasting.
• 
  Tile stove component after blasting with a heat-resistant paint coat.
• 
  Roofing bracket before repair.
• 
  Roofing bracket prepared on the lathe.
• 
  Sandblasted roofing bracket.
• 
  Galvanized roofing bracket.
• 
  Stainless steel machine component after beading.
• 
  The renovation of plastic equipment.
• 
  Tempered stainless pump component.
• 
  Tempered stainless pump component after cleaning.
• 
  Aluminum vacuum equipment. (1)
• 
  Aluminum vacuum equipment. (2)
• 
  Ceramic grinding disc after the grinding sheets have been burnt; it needs blasting.
• 
  A ceramic grinding disc needs cleaning.
• 
  A ceramic grinding disc after cleaning.
• 
  The housing of a slot machine made in 1914, before blasting.
• 
  The housing of a slot machine made in 1914, after blasting.
• 
  Plastic equipment.
• 
  Plastic equipment with its components.
• 
  The component of a sea boat’s clutch system…
• 
  The component of a sea boat’s clutch system after bead blasting.
• 
  The component of a sea boat’s clutch system bead blasted and packed.
• 
  Plastic equipment. (1)
• 
  Plastic equipment. (2)
• 
  Plastic equipment. (3)
• 
  Plastic equipment.
• 
  Plastic equipment of the Suzuki factory.
• 
  A piece of a 1944 tank’s caterpillar…
• 
  The pre-cleaning of the piece of the 1944 tank’s caterpillar…
• 
  The caterpillar piece and the petrified soil.
• 
  The caterpillar piece after cleaning.
• 
  The caterpillar of the 1944 tank after cleaning. (1)
• 
  The caterpillar of the 1944 tank after cleaning. (2)
• 
  The caterpillar of the 1944 tank after cleaning from a worm’s eye view.
• 
  Plastic equipment components before blasting.
• 
  Plastic equipment components before blasting – a closer look.
• 
  Plastic equipment components after blasting.
• 
  A rim before cleaning.
• 
  A rim before cleaning as requested.
• 
  The tanks of a stainless furnace.
• 
  The mounts of stainless furnace tanks.
• 
  Wrought-iron mirror frame after blasting.
• 
  A bumper.
• 
  A bumper from a closer look.
• 
  The bumper blasted as requested.
• 
  Flacon blow moulding equipment.
• 
  Plastic equipment component.
• 
  Fireplace ornaments before chroming.
• 
  Bead blasted fireplace.
• 
  Fireplace with a heat-resistant paint coat.
• 
  Motor Wheel pearls scattering, edge polishing.
• 
  Cobwebbed rim sanding, edge polishing.
• 
  Car Piston before bead blasting.
• 
  Car Piston after bead blasting.
• 
  Car engine room before bead blasting.
• 
  Car engine room after bead blasting.
• 
  Engine cover pearl scattering, polished.
• 
  Porsche sprinkled carburetor.
• 
  Matra Power Plant quarry scoop before bead blasting.
• 
  Matra Power Plant quarry scoop before bead blasting.
• 
  Matra Power Plant quarry scoop after bead blasting.
• 
  Matra Power Plant quarry scoop after bead blasting.
• 
  Machine parts by weight of the standard deviation, automatic machine.
• 
  Machine parts by weight of the standard deviation, automatic machine.
• 
  Lamp shade before cleaning.
• 
  Lamp shade after beading.
• 
  Lamp shade polished.
• 
  Workpieces of Military History Museum before machining.
• 
  Workpieces of Military History Museum after machining.
• 
  Old water meters before bead blasting.
• 
  Old water meters before bead blasting.
• 
  Old water meters after bead blasting.
• 
  Vibration abrasive drum before bead blasting.
• 
  Vibration abrasive drum before bead blasting.
• 
  Vibration abrasive drum after bead blasting.
• 
  Garden chairs before bead blasting.
• 
  Garden chairs after bead blasting.
• 
  Wrought iron balcony rail went wrong after painting.
• 
  Wrought iron balcony rail after bead blasting.
• 
  Wrought iron balcony rail after bead blasting (welded parts).
• 
  Wrought iron balcony rail installed to date.
• 
  Casing of Tetra cassette complete renovation.
• 
  Parts of a 1914 automatic gun before cleaning.
• 
  Parts of a 1914 automatic gun after cleaning.
• 
  Konkoly Thege's observatory complete renovation...
• 
  Konkoly Thege's observatory complete renovation...
• 
  Konkoly Thege's observatory complete renovation.
• 
  Brass model sandblasted with pearls.
• 
  Sewer drain lid cleaned.
• 
  Stainless steel hood before sandblasting.
• 
  Stainless steel hood after sandblasting.
• 
  Turbocharger with sandblasting.
• 
  Stainless steel container before sandblasting.
• 
  Stainless steel container after beating.
• 
  Cleaning a copper plate.
• 
  Candlestick sandblasted.
• 
  Gate of Access cover.
• 
  Sewing of industrial washing machines with stainless steel foam...
• 
  Sewing of industrial washing machines with stainless steel foam...
• 
  Industrial washing machine prepared for sandblasting, pickled.
• 
  Sandblasting of finishing elements for industrial washing machine, preparation for painting.
• 
  Sandblasted tank with pearls.
• 
  Mc Donald's shop equipment made of stainless steel.
• 
  Plaque of Liberty Bridge before sandblasting.
• 
  Plaque of Liberty Bridge after sandblasting.
• 
  Crown of Liberty Bridge before sandblasting.
• 
  Crown of Liberty Bridge after sandblasting.
• 
  Before cleaning the engine parts.
• 
  Engine Parts Cleaned.
• 
  Engine Parts Beaded.
• 
  Volkswagen beetle cleansed.
• 
  Watch Beaded.
• 
  Forged sandblasted.
• 
  Painted with forged primer paint.
• 
  Painted with wrought iron enamel paint.
• 
  Old semaphores..
• 
  Old semaphore sandblasted.
• 
  Old semaphores painted with primer.
• 
  Old semaphores painted.
• 
  Bronze propeller.
• 
  Wrought iron church grid.
• 
  Stainless steel tank with sand blasting.
• 
  Stainless steel container packed.
• 
  Aluminum optical instrument is a fine bead spraying.
• 
  Forged picture frame.
• 
  Cast iron crucifix.
• 
  Towing hooks sandblasted.
• 
  Stainless steel container roughly beaded.
• 
  Stainless steel container with bead sprouts.
• 
  Brass Blower (Matthias Church).
• 
  Cast iron garden items are sandblasted.
• 
  Cast iron garden items painted.
• 
  Old stove sandblasted.
• 
  Old stove painted with base paint.
• 
  Old stove painted with enamel paint.
• 
  Cast iron slag tray.
• 
  Cast iron slag tray painted.
• 
  Cast Iron Fountain Sandblasted.

Fiecare acum și apoi vom actualiza galeria cu poze interesante, inventiv sau spectaculoase.