Kovy

V tejto kategórii môžete zobraziť tie vzorky, kde základným materiálom je hlavne kov.

• 
  Hliníkové lišty pred tryskaním ...
• 
  Hliníkové lišty po tryskaní.
• 
  Secesný obrobok pred čistením povrchu ...
• 
  Secesný obrobok po čistení povrchu
• 
  Vzorová fotografia čistenia starožitných predmetov (1) ...
• 
  Starožitné predmety profesionálne demontované (2)
• 
  Strojový komponent používaný pri výrobe automobilových svetiel Pred a po pieskovaní obrubníkov Odstránenie oxidov kovov (1)
• 
  Strojový komponent používaný pri výrobe automobilových svetiel Pred a po pieskovaní obruží Odstránenie oxidov kovov (2)
• 
  Súčasť nápravového nárazového vozidla po temperovaní a otryskávaní, pripravená na miešanie.
• 
  Odstránenie vrstiev korózie a oxidov z komponentov plastových zariadení, okraje sú uložené.
• 
  Vnútorné puzdro z nehrdzavejúcej pece korodované nitridom titánu a nitridom hliníka.
• 
  Vnútorné puzdro z nehrdzavejúcej pece po otryskávaní (2)
• 
  Hliníkový odliatok pred homogenizáciou Odstránenie leštiacej značky (1)
• 
  Hliníkový odliatok po otryskávaní guľôčok Môžete pozorovať, že homogenizovaný povrch a skrutkový závit sú neporušené (2)
• 
  Homogenizovaný hliníkový odliatok po čiernom eloxálnom procese (komponent röntgenového prístroja Philips) (3)
• 
  Starožitnosť až po renováciu Renovácia bola vykonaná u našej spoločnosti (1)
• 
  Starožitnosť až po renováciu Renovácia bola vykonaná u našej spoločnosti (2)
• 
  Starožitnosť až po renováciu Renovácia bola vykonaná v našej spoločnosti (3)
• 
  Pri opravách sa povrch plastových zariadení poškodí, môže sa homogenizovať.
• 
  Priečka a jej komponenty po pieskovaní.
• 
  Auto časť pred odstránením vrstvy oxidu ...
• 
  Korálový korálkovaný trysky ...
• 
  Korálkový korálok bol vypálený.
• 
  Beaded car časť počas a pred tryskaním (zľava doprava).
• 
  Motorová loď pred úplnou rekonštrukciou, čiernou maľbou, dekoráciami a inými nečistotami.
• 
  Motorový čln po čistení je chránený ložiskové teleso (2)
• 
  Motorová loď pred renováciou Čierna maľba, dekorácie a iné nečistoty (3)
• 
  Motorové lode a ich súčasti po čistení (4)
• 
  Motorová loď a jej súčasti pred renováciou Čierne maľovanie, dekorácie a iné nečistoty (5)
• 
  Motorový čln a jeho komponenty po čistení. Kryt ložiska je chránený (6)
• 
  Meradlo a ozubené koleso, ktoré treba opraviť. (1)
• 
  Ozubené kolesá pred opravou. (2)
• 
  Opravné kolieska pred opravou. (3)
• 
  Ozubené kolesá po oprave, meradlo sa hodí, ozubené koleso je opravené (4)
• 
  Ozubené kolesá po oprave, meradlo funguje, ozubené koleso je opravené (5)
• 
  Ozubené kolesá boli skontrolované s rozchodom, to funguje (6)
• 
  Ozubené kolesá sa skontrolovali s rozchodom, to funguje (7)
• 
  Nerezový predmet pred prácou ... (1)
• 
  Nerezový predmet po obrube ... (2)
• 
  Druhá strana nehrdzavejúceho predmetu (3)
• 
  Nerezový predmet bezpečne zabalený na dodanie (4)
• 
  Trabant zložka pred trhaním.
• 
  Trabantová zložka po otryskávaní.
• 
  Ozubené kolesá pred odstránením vrstvy oxidu odstránené.
• 
  Ozubené koleso po otryskávaní, vrstva oxidu je odstránená.
• 
  Vypálený ráfik na opravu ...
• 
  Vypálený ráfik po čistení, pripravený na maľovanie.
• 
  Silne kontaminovaný a poškodený ľahký kovový okraj.
• 
  Silne kontaminovaný a poškodený ľahký kovový lem, po čistení, pripravený na ďalšiu prácu.
• 
  Zastrešené kusy, nielen oveľa estetické, ale trvanlivejšie.
• 
  Plastové zariadenia pred spracovaním.
• 
  Plastové vybavenie po spracovaní pre VDI 27.
• 
  Plastové zariadenia pred spracovaním.
• 
  Plastové vybavenie po spracovaní pre VDI 27.
• 
  Hliníkový nástroj pred spracovaním.
• 
  Hliníkový nástroj po spracovaní, pripravený pre VDI 30.
• 
  Rošt z tepaného železa v provinčnom panstve ...
• 
  Rošt z tepaného železa v provinčnom sídle po čistení, pripravený na galvanizáciu.
• 
  Staré predmety z medi pred rekonštrukciou.
• 
  Staré výrobky z medi po renovácii.
• 
  BMW motorcycle before beading its aluminum parts…
• 
  BMW motorcycle aluminum parts after beading.
• 
  Beaded BMW motorcycle component (1)
• 
  Beaded BMW motorcycle component (2)
• 
  BMW motorcycle: piston housing after bead blasting.
• 
  Rally car before cleaning. (1)
• 
  Rally car before cleaning. (2)
• 
  Rally car after cleaning. (1)
• 
  Rally car after cleaning. (2)
• 
  Cast-iron stove before renovation.
• 
  Components before nickelization.
• 
  Cast-iron stove component prepared for welding.
• 
  Cast-iron stove component after welding.
• 
  The stove after bead blasting.
• 
  The stove after full renovation.
• 
  The DKW motorcycle used to look like this.
• 
  The motorcycle disassembled.
• 
  The gears are disassembled.
• 
  You can observe that it was painted without a suitable surface treatment.
• 
  DKW cylinder head and gear housing after beading.
• 
  DKW cylinder head and gear housing after beading. The crossbar needs blasting.
• 
  DKW motorcycle is blasted.
• 
  Components with ground coat. (Done by the owner himself).
• 
  Motor rim prepared for blasting.
• 
  The rim is disassembled before blasting.
• 
  The rim after blasting. (1)
• 
  The rim after blasting. (2)
• 
  DKW components after blasting. (The engraved data which can be found on these components are carefully protected.)
• 
  The engraved data on the surface becomes cleaner and easily readable. It is possible to perform such fine blasting. (1)
• 
  The engraved data on the surface becomes cleaner and easily readable. It is possible to perform such fine blasting. (2)
• 
  DKW motor component after cleaning.
• 
  Motor hub after beading. (Protection by the owner himself)
• 
  Mercedes cooling fan blade before renovation...
• 
  Mercedes cooling fan blade after renovation.
• 
  Diving tanks.
• 
  We pay scrupulous attention to our customers’ requests so that the engraved data on the surface remain intact.
• 
  Diving tanks after blasting.
• 
  Diving tanks after blasting. The signs on the surface remained intact.
• 
  Fireplace accessory before blasting.
• 
  Fireplace accessory after blasting.
• 
  Rims. New race, new colour. Before cleaning. (1)
• 
  Rims. New race, new colour. Before cleaning. (2)
• 
  After cleaning. It is possible to blast objects in this quantity in 1 day.
• 
  Auto bus brake system before sandblasting.
• 
  Auto bus brake system after sandblasting.
• 
  Pasta machine before degreasing and beading. (1)
• 
  Pasta machine before degreasing and beading. (2)
• 
  Pasta machine before degreasing and beading. (3)
• 
  Pasta machine before degreasing and beading. (4)
• 
  After degreasing and soaking, the object can be blasted. (1)
• 
  After degreasing and soaking, the object can be blasted. (2)
• 
  After degreasing and soaking, the object can be blasted. (3)
• 
  After degreasing and soaking, the object can be blasted. (4)
• 
  Soaked and beaded. Now it can be installed. (1)
• 
  Soaked and beaded. Now it can be installed. (2)
• 
  Soaked and beaded. Now it can be installed. (3)
• 
  The mount of a banking entry system after welding. (1)
• 
  The mount of a banking entry system after welding. (2)
• 
  The mount of a banking entry system after beading. (1)
• 
  The mount of a banking entry system after beading. (2)
• 
  Red copper electrical component after being welded with silver.
• 
  Electrical component blasted with fine material ensuring perfect electrical contact…and it’s aesthetical.
• 
  Wrought-iron banister needs coating. (1)
• 
  Wrought-iron banister needs coating. (2)
• 
  Wrought-iron banister needs coating. (3)
• 
  Wrought-iron banister after bead blasting; now it can be painted with guarantee. (1)
• 
  Wrought-iron banister after bead blasting; now it can be painted with guarantee. (2)
• 
  Wrought-iron banister after bead blasting; now it can be painted with guarantee. (3)
• 
  Bead blasted and contaminated American motor boat blocs.
• 
  Both motor boat blocs are prepared for processing. They are easier to work on.
• 
  Old-timer car body parts need blasting. (1)
• 
  Old-timer car body parts need blasting. (2)
• 
  Old-timer car body parts after blasting. Now it is locked and polished.
• 
  Skoda Octavia crankcase and lid.
• 
  Skoda Octavia crankcase and lid, components beaded.
• 
  Auto bus turbo charger and piston – before renovation...
• 
  Auto bus turbo charger – the surface is renovated with beading.
• 
  Valve lid.
• 
  The valve lid prepared for electrostatic painting.
• 
  A part of cleaned wrought-iron.
• 
  Window bars after blasting. (The galvanized layer remained, only the painting was removed.)
• 
  Feeding hopper for a food machine. (1)
• 
  Feeding hopper for a food machine. (2)
• 
  Feeding hopper for a food machine. (3)
• 
  The feeding hopper preserved with beading and oiling.(1)
• 
  The feeding hopper preserved with beading and oiling.(2)
• 
  The feeding hopper preserved with beading and oiling.(3)
• 
  Spoilt polish. The object needs homogenizing.
• 
  The objects were bead blasted. It is cheaper, quicker, and of high quality.
• 
  Plastic equipment prepared for VDI 36.
• 
  An object without appropriate surface preparation. The fault is due to bad adherence. (The coating is about 3 weeks old.)
• 
  Spoilt electrostatic painting. The work piece needs to be cleaned.
• 
  Spoilt electrostatic painting after blasting.
• 
  Old-timer car rim.
• 
  Old-timer car rim after beading.
• 
  Old-timer motor component.
• 
  Old-timer motor component cleaned.
• 
  Old-timer motor component before beading.
• 
  Old-timer motor component after beading.
• 
  Small motor parts.
• 
  Small motor parts before galvanization.
• 
  Puch engine needs beading.
• 
  Puch engine after beading.
• 
  Old-timer motor housing after cleaning.
• 
  Old-timer motor after cleaning.
• 
  Old-timer motor components after cleaning.
• 
  Old-timer motor components after cleaning.
• 
  Motorcycle sidecar.
• 
  Motorcycle sidecar.
• 
  Ford Thunderbird needs bead blasting.
• 
  Ford Thunderbird bead blasted.
• 
  Ford Thunderbird bead blasted.
• 
  Ford Thunderbird bead blasted.
• 
  Paint tank (manufactured by our company)...
• 
  Paint tank sandblasted (manufactured by our company).
• 
  Cast-iron radiator before cleaning.
• 
  Cast-iron radiator after cleaning.
• 
  Drum brake before renovation...
• 
  Drum brake after bead blasting. (Observe the professional covering of the bearing houses.)
• 
  Drum brake system after electrostatic painting.
• 
  Wrought-iron door after blasting.
• 
  Wrought-iron wall ornament.
• 
  Wrought-iron wall ornament sandblasted.
• 
  Wrought-iron chandelier.
• 
  Wrought-iron chandelier sandblasted.
• 
  Old-timer motorcycle.
• 
  Old-timer motorcycle after cleaning.
• 
  A stove from the rubbish dump.
• 
  A stove from the rubbish dump after cleaning.
• 
  A stove from the rubbish dump after cleaning with a heat-resistant paint coat.
• 
  Old theatre accessory (washstand).
• 
  Old theatre accessory (washstand) after cleaning.
• 
  Car rim with and without blasting.
• 
  Wrought-iron bars.
• 
  Wrought-iron bars after cleaning.
• 
  Wrought-iron banister.
• 
  Wrought-iron banister bead blasted.
• 
  An old iron.
• 
  Old irons prepared for painting.
• 
  Old iron after painting.
• 
  The steel structure of a roof after cleaning.
• 
  An old child’s stove.
• 
  An old child’s stove bead blasted.
• 
  Old weapons…
• 
  Old weapons after cleaning.
• 
  Cog-wheels after tempering.
• 
  Cog-wheels shot-blasted.
• 
  Gas convector housing.
• 
  Gas convector housings after bead blasting.
• 
  Bank lamp after full renovation.
• 
  Enameled drinking fountain before cleaning.
• 
  Enameled drinking fountain after cleaning.
• 
  Tile stove component before blasting.
• 
  Tile stove component after blasting.
• 
  Tile stove component after blasting with a heat-resistant paint coat.
• 
  Roofing bracket before repair.
• 
  Roofing bracket prepared on the lathe.
• 
  Sandblasted roofing bracket.
• 
  Galvanized roofing bracket.
• 
  Stainless steel machine component after beading.
• 
  The renovation of plastic equipment.
• 
  Tempered stainless pump component.
• 
  Tempered stainless pump component after cleaning.
• 
  Aluminum vacuum equipment. (1)
• 
  Aluminum vacuum equipment. (2)
• 
  Ceramic grinding disc after the grinding sheets have been burnt; it needs blasting.
• 
  A ceramic grinding disc needs cleaning.
• 
  A ceramic grinding disc after cleaning.
• 
  The housing of a slot machine made in 1914, before blasting.
• 
  The housing of a slot machine made in 1914, after blasting.
• 
  Plastic equipment.
• 
  Plastic equipment with its components.
• 
  The component of a sea boat’s clutch system…
• 
  The component of a sea boat’s clutch system after bead blasting.
• 
  The component of a sea boat’s clutch system bead blasted and packed.
• 
  Plastic equipment. (1)
• 
  Plastic equipment. (2)
• 
  Plastic equipment. (3)
• 
  Plastic equipment.
• 
  Plastic equipment of the Suzuki factory.
• 
  A piece of a 1944 tank’s caterpillar…
• 
  The pre-cleaning of the piece of the 1944 tank’s caterpillar…
• 
  The caterpillar piece and the petrified soil.
• 
  The caterpillar piece after cleaning.
• 
  The caterpillar of the 1944 tank after cleaning. (1)
• 
  The caterpillar of the 1944 tank after cleaning. (2)
• 
  The caterpillar of the 1944 tank after cleaning from a worm’s eye view.
• 
  Plastic equipment components before blasting.
• 
  Plastic equipment components before blasting – a closer look.
• 
  Plastic equipment components after blasting.
• 
  A rim before cleaning.
• 
  A rim before cleaning as requested.
• 
  The tanks of a stainless furnace.
• 
  The mounts of stainless furnace tanks.
• 
  Wrought-iron mirror frame after blasting.
• 
  A bumper.
• 
  A bumper from a closer look.
• 
  The bumper blasted as requested.
• 
  Flacon blow moulding equipment.
• 
  Plastic equipment component.
• 
  Fireplace ornaments before chroming.
• 
  Bead blasted fireplace.
• 
  Fireplace with a heat-resistant paint coat.
• 
  Motor Wheel pearls scattering, edge polishing.
• 
  Cobwebbed rim sanding, edge polishing.
• 
  Car Piston before bead blasting.
• 
  Car Piston after bead blasting.
• 
  Car engine room before bead blasting.
• 
  Car engine room after bead blasting.
• 
  Engine cover pearl scattering, polished.
• 
  Porsche sprinkled carburetor.
• 
  Matra Power Plant quarry scoop before bead blasting.
• 
  Matra Power Plant quarry scoop before bead blasting.
• 
  Matra Power Plant quarry scoop after bead blasting.
• 
  Matra Power Plant quarry scoop after bead blasting.
• 
  Machine parts by weight of the standard deviation, automatic machine.
• 
  Machine parts by weight of the standard deviation, automatic machine.
• 
  Lamp shade before cleaning.
• 
  Lamp shade after beading.
• 
  Lamp shade polished.
• 
  Workpieces of Military History Museum before machining.
• 
  Workpieces of Military History Museum after machining.
• 
  Old water meters before bead blasting.
• 
  Old water meters before bead blasting.
• 
  Old water meters after bead blasting.
• 
  Vibration abrasive drum before bead blasting.
• 
  Vibration abrasive drum before bead blasting.
• 
  Vibration abrasive drum after bead blasting.
• 
  Garden chairs before bead blasting.
• 
  Garden chairs after bead blasting.
• 
  Wrought iron balcony rail went wrong after painting.
• 
  Wrought iron balcony rail after bead blasting.
• 
  Wrought iron balcony rail after bead blasting (welded parts).
• 
  Wrought iron balcony rail installed to date.
• 
  Casing of Tetra cassette complete renovation.
• 
  Parts of a 1914 automatic gun before cleaning.
• 
  Parts of a 1914 automatic gun after cleaning.
• 
  Konkoly Thege's observatory complete renovation...
• 
  Konkoly Thege's observatory complete renovation...
• 
  Konkoly Thege's observatory complete renovation.
• 
  Brass model sandblasted with pearls.
• 
  Sewer drain lid cleaned.
• 
  Stainless steel hood before sandblasting.
• 
  Stainless steel hood after sandblasting.
• 
  Turbocharger with sandblasting.
• 
  Stainless steel container before sandblasting.
• 
  Stainless steel container after beating.
• 
  Cleaning a copper plate.
• 
  Candlestick sandblasted.
• 
  Gate of Access cover.
• 
  Sewing of industrial washing machines with stainless steel foam...
• 
  Sewing of industrial washing machines with stainless steel foam...
• 
  Industrial washing machine prepared for sandblasting, pickled.
• 
  Sandblasting of finishing elements for industrial washing machine, preparation for painting.
• 
  Sandblasted tank with pearls.
• 
  Mc Donald's shop equipment made of stainless steel.
• 
  Plaque of Liberty Bridge before sandblasting.
• 
  Plaque of Liberty Bridge after sandblasting.
• 
  Crown of Liberty Bridge before sandblasting.
• 
  Crown of Liberty Bridge after sandblasting.
• 
  Before cleaning the engine parts.
• 
  Engine Parts Cleaned.
• 
  Engine Parts Beaded.
• 
  Volkswagen beetle cleansed.
• 
  Watch Beaded.
• 
  Forged sandblasted.
• 
  Painted with forged primer paint.
• 
  Painted with wrought iron enamel paint.
• 
  Old semaphores..
• 
  Old semaphore sandblasted.
• 
  Old semaphores painted with primer.
• 
  Old semaphores painted.
• 
  Bronze propeller.
• 
  Wrought iron church grid.
• 
  Stainless steel tank with sand blasting.
• 
  Stainless steel container packed.
• 
  Aluminum optical instrument is a fine bead spraying.
• 
  Forged picture frame.
• 
  Cast iron crucifix.
• 
  Towing hooks sandblasted.
• 
  Stainless steel container roughly beaded.
• 
  Stainless steel container with bead sprouts.
• 
  Brass Blower (Matthias Church).
• 
  Cast iron garden items are sandblasted.
• 
  Cast iron garden items painted.
• 
  Old stove sandblasted.
• 
  Old stove painted with base paint.
• 
  Old stove painted with enamel paint.
• 
  Cast iron slag tray.
• 
  Cast iron slag tray painted.
• 
  Cast Iron Fountain Sandblasted.

Naše materiály postupne rozširujeme o také obrázky, ktoré sú zaujímavé, efektné alebo poučné.